Certified Test Gauge

SSPTG1000

The CERTIFIED TEST GAUGE, for hydrostatic testing of low-pressure cylinders (required by NFPA 10), meets test gauge requirements for both volumetric expansion and modified hydrostatic (proof pressure) testing of DOT-specified cylinders. An additional gauge should be used as a master gauge for a daily system check, as required by NFPA 10. It features a 0–1000 psi range, 0.25% accuracy (full scale), and 5 psi minor graduations and has an externally adjustable dial that measures 4 1/2". The gauge has a 1/4" NPT lower connection that fits the HTP test pump, plus it is calibrated and certified prior to shipment.
Brooks can deadweight test and recertify your test or master gauges in our Charlotte, N.C. location. Send carefully packed gauges (with ALL adapters removed), marked "Assembly Manager in Concord address:

Brooks Equipment
ATTN: ASSEMBLY MANAGER
160 International Drive NW, Suite C
Concord, NC 28027
Your re-certified gauge will be shipped back within two business days of receipt (using the same method of shipment unless otherwise instructed). Not for high-pressure testing!

WARNING: Not responsible for damage due to adaptors not being removed before shipping! Brooks cannot repair damaged gauges!

For Gauge Re-Calibration Services, please Complete & Submit Gauge Calibration Service Form to: BRKCustomProducts@BrooksEquipment.com

Full Product Info